Loading... Please wait...

Our Newsletter


Ushio FCR, JC12-100W/GY6.35, USH 1000490

  • Ushio FCR JC12-100W/GY6.35, SKU# USH 1000490
Price:
¥2,705.63
SKU:
USH 1000490
Brand:
Weight:
0.20 LBS
Availability:
Stock - 4 days
Shipping:
Calculated at checkout
Quantity:


Product Description

Ushio FCR Halogen Lamp, p/n 1000490 

is a 100-watt, 12-volt tungsten halogen bi-pin lamp designed for high-intensity illumination in scientific, medical, optical, and projection equipment. Identified by ANSI code FCR and manufacturer designation JC12V-100W, this compact, single-ended quartz halogen lamp delivers approximately 3,400 lumens with a 3300K color temperature.

Its concentrated CBar6 filament, clear quartz envelope, and GY6.35 bi-pin base make it suitable for optical systems requiring a compact light source with precise filament positioning. Typical applications include microscope illuminators, dental equipment, microfilm readers, optical instruments, and projection systems.

With an average rated life of 50 hours, the FCR is optimized for high light output rather than extended service intervals. It is intended for equipment specifically designed to accommodate its electrical, mechanical, and optical characteristics.

For replacement applications, verify the ANSI FCR designation, 12V operating voltage, 100W power rating, GY6.35 base, and physical dimensions before ordering. Matching the complete lamp specification helps maintain the intended illumination performance and equipment compatibility.

Applications

Microscopy and Laboratory Instrumentation

  • Illumination systems in compatible compound and specialty microscopes.
  • Optical instruments requiring concentrated visible light from a compact filament.
  • Laboratory inspection and imaging equipment using ANSI FCR lamps.
  • Replacement lamps for compatible microscope illuminator assemblies.

Medical and Dental Equipment

  • Compatible dental illumination and fiber-optic lighting systems.
  • Medical examination and diagnostic equipment incorporating FCR lamps.
  • X-ray collimator illumination assemblies requiring an ANSI FCR light source.

Compatibility with individual medical devices must be confirmed against the equipment manufacturer's specifications.

Microfilm and Optical Imaging

  • Microfilm readers and document imaging equipment.
  • Optical projection and viewing systems.
  • Inspection instruments requiring concentrated, high-intensity illumination.

Projection and Specialized Lighting

  • Compatible photographic and projection equipment.
  • Specialized optical systems requiring 3300K tungsten halogen illumination.
  • Equipment originally specified for ANSI FCR, JC12V-100W lamps.

Features

  • High-intensity illumination: Approximately 3,400 initial lumens provide substantial visible light output from a compact source, supporting demanding optical applications.
  • Concentrated filament geometry: The CBar6 filament configuration supports efficient light collection in optical systems designed around this lamp.
  • Warm, continuous-spectrum light: Tungsten halogen technology produces broad-spectrum visible illumination suitable for many optical and imaging applications.
  • Compact optical source: The small quartz envelope enables integration into instruments with limited lamp compartment space.
  • Recognized ANSI designation: ANSI FCR identification simplifies replacement selection when the equipment manufacturer specifies this lamp type.
  • Established halogen technology: Provides immediate light output without the warm-up requirements associated with certain discharge lamp technologies.
  • Direct replacement capability: Suitable for equipment originally designed for the Ushio 1000490 or equivalent ANSI FCR lamp, subject to verification of all applicable specifications.

Comparison with other lighting technologies: LED alternatives may offer longer service life and lower energy consumption, but they do not necessarily reproduce the FCR lamp's filament geometry, spectral output, or optical characteristics. Likewise, longer-life halogen lamps with the same voltage, wattage, and base may have different light output or color temperature. For equipment designed around an ANSI FCR lamp, select the specified lamp unless an alternative has been explicitly approved by the equipment manufacturer.

Specifications

Parameter Specification
Manufacturer Ushio
Manufacturer Part Number 1000490
ANSI Code FCR
Lamp Designation JC12V-100W
Lamp Technology Tungsten Halogen
Lamp Construction Single-Ended Quartz
Rated Power 100 W
Rated Voltage 12 V
Lamp Base GY6.35, 2-Pin
Bulb Shape T3.5
Bulb Finish Clear
Filament Configuration CBar6
Initial Luminous Flux 3,000 lm
Color Temperature 3300 K
Average Rated Life 50 hours
Maximum Overall Length 1.65 in. (41.0 mm)
Lamp Diameter 0.43 in. (11.0 mm)
Light Center Length 1.18 in. (30.0 mm)
Operating Position Base Down / Horizontal (BD/Hor)
UPC 048777131855

Operating considerations: The lamp requires a compatible 12V power supply and a fixture rated for its 100W power consumption and operating temperature. Do not connect directly to standard 120V line voltage. Allow the lamp to cool before replacement. Handle the quartz envelope according to the equipment manufacturer's instructions, avoiding contamination from bare fingers.

Important: The 50-hour rating is an average rated life, not a guaranteed operating duration. Actual service life depends on operating voltage, switching frequency, cooling conditions, installation, and equipment operation.

For equipment-specific replacement instructions, consult the operator or service manual supplied with the instrument. The FCR lamp itself does not require a separate operator interface.

Frequently Asked Questions (FAQs)

1. Is the Ushio 1000490 compatible with other ANSI FCR lamps?

The ANSI FCR designation provides a standardized identification for replacement selection. Lamps identified as FCR are intended to meet the corresponding lamp specification. Nevertheless, verify the operating voltage, wattage, base, dimensions, and any equipment-specific requirements before substitution.

4. Why does the Ushio FCR lamp have a rated life of only 50 hours?

The FCR operates at a relatively high filament temperature to achieve its specified light output and color temperature. This design prioritizes optical performance rather than long service life. Instruments requiring this light output may not perform as intended with a lower-temperature, longer-life substitute.

5. Can I replace the Ushio FCR halogen lamp with an LED lamp?

Not automatically. An LED replacement must meet the instrument's electrical, mechanical, optical, and thermal requirements. Differences in light-source geometry, spectrum, and optical alignment can affect instrument performance. Use an LED alternative only when specifically approved for the equipment.

6. Does the Ushio 1000490 FCR require a special power supply?

The lamp operates at a rated voltage of 12V and consumes 100W. It requires a compatible power supply and lamp holder designed for that electrical load. Use only in approved enclosed halogen fixtures with appropriate thermal management. Do not connect the lamp directly to 120V line voltage.

7. How can I confirm that the Ushio FCR is the correct replacement for my instrument?

Check the equipment manual, original lamp markings, or manufacturer's replacement parts list for ANSI code FCR or Ushio 1000490. Confirm the 12V, 100W rating, GY6.35 base, physical dimensions, and any equipment-specific installation requirements. LabgearUSA can assist with lamp identification when an equipment model number or existing lamp designation is available.

Warranty

We can assist customers with product identification, order discrepancies, and suspected manufacturing defects. Because tungsten halogen lamps are consumable components, their average rated life is not a guarantee of actual operating hours.

Warranty or defect claims are subject to the applicable manufacturer warranty and our sales and return policies. Customers should retain their order information and contact ScienceLighting.com promptly if a lamp arrives damaged, incorrectly supplied, or appears defective.

Ordering

Order the genuine Ushio 1000490 FCR halogen lamp for instruments requiring a 100W, 12V, GY6.35 bi-pin light source with ANSI FCR specifications.

Before placing an order, confirm that your existing lamp or equipment documentation identifies ANSI FCR, Ushio 1000490, or JC12V-100W. Pay particular attention to the lamp's rated life and light output when comparing potential substitutes.

For multiple-unit requirements, recurring maintenance purchases, or help identifying the proper replacement lamp, contact LabgearUSA with the equipment manufacturer, instrument model, and current lamp identification.

Add to Cart to purchase the Ushio FCR halogen lamp through ScienceLighting.com and for calculation of shipping cost.  

---


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!