Loading... Please wait...is a 100-watt, 12-volt tungsten halogen bi-pin lamp designed for high-intensity illumination in scientific, medical, optical, and projection equipment. Identified by ANSI code FCR and manufacturer designation JC12V-100W, this compact, single-ended quartz halogen lamp delivers approximately 3,400 lumens with a 3300K color temperature.
Its concentrated CBar6 filament, clear quartz envelope, and GY6.35 bi-pin base make it suitable for optical systems requiring a compact light source with precise filament positioning. Typical applications include microscope illuminators, dental equipment, microfilm readers, optical instruments, and projection systems.
With an average rated life of 50 hours, the FCR is optimized for high light output rather than extended service intervals. It is intended for equipment specifically designed to accommodate its electrical, mechanical, and optical characteristics.
For replacement applications, verify the ANSI FCR designation, 12V operating voltage, 100W power rating, GY6.35 base, and physical dimensions before ordering. Matching the complete lamp specification helps maintain the intended illumination performance and equipment compatibility.
Compatibility with individual medical devices must be confirmed against the equipment manufacturer's specifications.
Comparison with other lighting technologies: LED alternatives may offer longer service life and lower energy consumption, but they do not necessarily reproduce the FCR lamp's filament geometry, spectral output, or optical characteristics. Likewise, longer-life halogen lamps with the same voltage, wattage, and base may have different light output or color temperature. For equipment designed around an ANSI FCR lamp, select the specified lamp unless an alternative has been explicitly approved by the equipment manufacturer.
| Parameter | Specification |
|---|---|
| Manufacturer | Ushio |
| Manufacturer Part Number | 1000490 |
| ANSI Code | FCR |
| Lamp Designation | JC12V-100W |
| Lamp Technology | Tungsten Halogen |
| Lamp Construction | Single-Ended Quartz |
| Rated Power | 100 W |
| Rated Voltage | 12 V |
| Lamp Base | GY6.35, 2-Pin |
| Bulb Shape | T3.5 |
| Bulb Finish | Clear |
| Filament Configuration | CBar6 |
| Initial Luminous Flux | 3,000 lm |
| Color Temperature | 3300 K |
| Average Rated Life | 50 hours |
| Maximum Overall Length | 1.65 in. (41.0 mm) |
| Lamp Diameter | 0.43 in. (11.0 mm) |
| Light Center Length | 1.18 in. (30.0 mm) |
| Operating Position | Base Down / Horizontal (BD/Hor) |
| UPC | 048777131855 |
Operating considerations: The lamp requires a compatible 12V power supply and a fixture rated for its 100W power consumption and operating temperature. Do not connect directly to standard 120V line voltage. Allow the lamp to cool before replacement. Handle the quartz envelope according to the equipment manufacturer's instructions, avoiding contamination from bare fingers.
Important: The 50-hour rating is an average rated life, not a guaranteed operating duration. Actual service life depends on operating voltage, switching frequency, cooling conditions, installation, and equipment operation.
For equipment-specific replacement instructions, consult the operator or service manual supplied with the instrument. The FCR lamp itself does not require a separate operator interface.
The ANSI FCR designation provides a standardized identification for replacement selection. Lamps identified as FCR are intended to meet the corresponding lamp specification. Nevertheless, verify the operating voltage, wattage, base, dimensions, and any equipment-specific requirements before substitution.
The FCR operates at a relatively high filament temperature to achieve its specified light output and color temperature. This design prioritizes optical performance rather than long service life. Instruments requiring this light output may not perform as intended with a lower-temperature, longer-life substitute.
Not automatically. An LED replacement must meet the instrument's electrical, mechanical, optical, and thermal requirements. Differences in light-source geometry, spectrum, and optical alignment can affect instrument performance. Use an LED alternative only when specifically approved for the equipment.
The lamp operates at a rated voltage of 12V and consumes 100W. It requires a compatible power supply and lamp holder designed for that electrical load. Use only in approved enclosed halogen fixtures with appropriate thermal management. Do not connect the lamp directly to 120V line voltage.
Check the equipment manual, original lamp markings, or manufacturer's replacement parts list for ANSI code FCR or Ushio 1000490. Confirm the 12V, 100W rating, GY6.35 base, physical dimensions, and any equipment-specific installation requirements. LabgearUSA can assist with lamp identification when an equipment model number or existing lamp designation is available.
We can assist customers with product identification, order discrepancies, and suspected manufacturing defects. Because tungsten halogen lamps are consumable components, their average rated life is not a guarantee of actual operating hours.
Warranty or defect claims are subject to the applicable manufacturer warranty and our sales and return policies. Customers should retain their order information and contact ScienceLighting.com promptly if a lamp arrives damaged, incorrectly supplied, or appears defective.
Order the genuine Ushio 1000490 FCR halogen lamp for instruments requiring a 100W, 12V, GY6.35 bi-pin light source with ANSI FCR specifications.
Before placing an order, confirm that your existing lamp or equipment documentation identifies ANSI FCR, Ushio 1000490, or JC12V-100W. Pay particular attention to the lamp's rated life and light output when comparing potential substitutes.
For multiple-unit requirements, recurring maintenance purchases, or help identifying the proper replacement lamp, contact LabgearUSA with the equipment manufacturer, instrument model, and current lamp identification.
Add to Cart to purchase the Ushio FCR halogen lamp through ScienceLighting.com and for calculation of shipping cost.
---
Choose a currency below to display product prices in the selected currency.
US Dollar
EURO - EUROPEAN UNION
JPY -JAPAN YEN
CAD - CANADA
INR - INDIA
CNY - CHINA
MXN - MEXICO
GBP - GREAT BRITAIN
SGD - SINGAPORE
KRW - SOUTH KOREAN REPUBLIC
AUD - AUSTRALIA
SAR - SAUDI ARABIA
ZAR - SOUTH AFRICAs
CHF - SWITZERLAND
ARA - ARGENTINA
BRL - BRAZIL
CLP - CHILE
COP - COLOMBIA
DKK - DENMARK
IDR - INDONESIA
NOK - NORWAY
NZD - NEW ZEALAND
PHP - PHILIPPINES
PLN - POLAND
SEK - SWEDEN
TWD - TAIWAN
UAH - UKRAINE
THB - THAILAND
MYR - MALAYSIAN RINGGIT
AED - UNITED ARAB EMIRATES
BGN - BULGARIA
HUF - HUNGARY
CZK - CZECH REPUBLIC
ILS - ISRAEL
EGP - EGYPT
TRY - TURKEY
RON - ROMANIA
KES - KENYA
PKR - PAKISTAN
IQD - IRAQ
KWD - KUWAIT
VND - VIET NAM
JMD - JAMAICA
DOP - DOMINICAN REPUBLIC
JOD - JORDAN
PEN - PERU