Loading... Please wait...
is a 150-watt, double-ended xenon short-arc discharge lamp engineered for high-intensity illumination in scientific, medical, analytical, and industrial optical systems. Its compact arc produces a concentrated point source with a continuous visible spectrum, approximately 6000 K daylight color temperature, and exceptional color rendering (CRI 98).
Designed for optical equipment requiring stable, accurately rendered illumination, the XBO 150 W/4 delivers 3000 lumens of nominal luminous flux and high luminance for efficient light collection and optical coupling. Its SUPRASIL quartz envelope provides improved transmission below 250 nm compared with conventional quartz, supporting applications that require ultraviolet spectral transmission.
With a nominal 1200-hour service life, high arc stability, instant illumination, and hot-restart capability when supported by the operating equipment, this lamp is a specialized solution for microscopy, analytical instrumentation, fiber-optic illumination, imaging, and solar simulation.
Manufacturer: OSRAM | Model: XBO 150 W/4 | Product Number: 69238 | Product Code: 4050300508382
The OSRAM XBO 150 W/4 supports optical systems in which concentrated light output, spectral continuity, and color fidelity are important. Its compact arc and daylight-like output make it particularly suitable for specialized instruments designed around xenon short-arc illumination.
Instrument compatibility must be verified by the equipment manufacturer's specified lamp model and electrical, mechanical, and optical requirements.
Medical applications require equipment specifically designed and approved for this lamp. The lamp itself is a component, not a complete medical illumination system.
The short xenon arc generates high luminance from a small emitting region, making it suitable for optical systems that collect, focus, or direct light through lenses, reflectors, and fiber-optic assemblies. This supports efficient optical coupling when the lamp is matched to the system design.
The approximately 6000 K color temperature produces a daylight-like appearance. With a CRI of 98 and a continuous visible spectrum, the lamp supports faithful color reproduction in imaging, observation, and optical applications where spectral quality matters.
Stable arc operation helps maintain consistent optical output in properly regulated systems. This is especially valuable in applications where changing source position or intensity could interfere with observation, image quality, or instrument performance.
The lamp produces light immediately after successful ignition and is designed for hot restarting. Hot-restart operation requires compatible ignition circuitry and must follow the operating equipment manufacturer's instructions.
The XBO 150 W/4 supports dimming within its specified operating limits when paired with suitable current-regulated operating equipment. This provides flexibility for applications requiring controlled illumination intensity.
The lamp incorporates SUPRASIL high-purity quartz, which provides greater transmission at wavelengths below 250 nm than conventional quartz glass. This is useful in appropriately designed optical instruments where short-wavelength ultraviolet transmission is required. Actual delivered UV intensity depends on the complete optical system.
Compared with conventional halogen lamps, xenon short-arc lamps provide a more daylight-like color temperature and an intense, compact source. LEDs can offer longer operating life, lower power consumption, and simpler control, but their spectral distribution and emitting geometry differ from xenon short-arc lamps.
For instruments designed around the continuous xenon spectrum and compact arc geometry, an LED or halogen replacement cannot be assumed equivalent without validating optical performance, electrical compatibility, and instrument requirements.
Specifications are based on OSRAM manufacturer information for the XBO 150 W/4. Photometric values identified as initial are typical initial measurements, rather than guaranteed output throughout lamp life.
| Product Identification | |
|---|---|
| Manufacturer | OSRAM |
| Lamp model | XBO 150 W/4 |
| Product number (Americas) | 69238 |
| Global product code / GTIN | 4050300508382 |
| Lamp technology | Xenon short-arc discharge |
| Configuration | Double-ended, without reflector |
| Electrical Characteristics | |
| Nominal wattage | 150 W |
| Construction wattage | 0.15 kW |
| Operating lamp wattage | 130–175 W |
| Initial lamp voltage | 17–21 V |
| Nominal current | 7.5 A |
| Current type | DC |
| Optical Characteristics | |
| Nominal luminous flux | 3000 lm |
| Typical initial luminous intensity | 300 cd |
| Typical initial luminance | 15,000 cd/cm² |
| Color temperature | Approximately 6000 K |
| Color rendering index | Ra 98 |
| Visible-spectrum output | Continuous spectrum |
| Quartz envelope | SUPRASIL quartz |
| Physical Dimensions | |
| Overall length | 5.91 in (150.0 mm) |
| Mounting length | 5.00 in (127.0 mm) |
| Lamp diameter | 0.79 in (20.0 mm) |
| Light center length | 2.24 in (57.0 mm) |
| Cold electrode gap | 0.098 in (2.5 mm) |
| Base, anode (+) | SFc12-4 |
| Base, cathode (-) | SFcX12-4 |
| Operating Conditions and Service Life | |
| Rated lamp life | 1200 hours |
| Operating position | Vertical ±15° (s15), anode (+) on top |
| Cooling | Forced cooling required |
| Hot restart | Supported with compatible equipment |
| Dimming | Supported within specified operating limits |
Xenon short-arc lamps contain gas under high internal pressure, including when cold. They also generate intense visible and ultraviolet radiation. Incorrect handling or operation can cause serious injury.
Open operation is permissible only when appropriate engineered safety measures are implemented. Installation and service should be performed by qualified personnel familiar with high-pressure discharge lamps.
The XBO 150 W/4 is used in compatible scientific and medical optical equipment requiring an intense, compact, daylight-like light source. Typical applications include microscopy, analytical instrumentation, endoscopy, fiber-optic illumination, optical imaging, and solar simulation systems. Actual suitability depends on the instrument's specified lamp configuration.
Not automatically. Although both belong to the OSRAM 150 W xenon short-arc family, they are distinct lamp models. Compatibility depends on the specified lamp number, electrode arrangement, base connections, lamp dimensions, operating position, electrical requirements, and optical alignment. Use the exact model specified by the instrument manufacturer unless an approved alternative has been established.
The XBO 150 W/4 is a DC xenon short-arc lamp with a nominal operating current of 7.5 A and an initial lamp voltage range of 17–21 V. It requires a compatible regulated power supply and appropriate high-voltage ignition equipment. It cannot be connected directly to ordinary AC line power.
OSRAM specifies a nominal lamp life of 1200 hours. Actual service life depends on correct electrical operation, cooling, installation, switching conditions, and the operating environment. The rated life is a planning value, not a guarantee that every lamp will operate for exactly 1200 hours.
The XBO 150 W/4 uses SUPRASIL quartz, which provides improved transmission below 250 nm compared with conventional quartz. This can benefit equipment designed to use shorter ultraviolet wavelengths. However, actual UV output at a particular wavelength and the system's optical transmission must be evaluated for the intended application.
Yes. The lamp is specified for vertical operation within ±15°, with the positive anode at the top, and requires forced cooling. Because the lamp operates under high internal pressure and produces intense radiation, it must be installed in an appropriate protective enclosure and operated according to manufacturer instructions.
The OSRAM XBO 150 W/4 is a precision discharge lamp intended for operation within the manufacturer's stated electrical, mechanical, and environmental requirements. Any warranty or manufacturing-defect claim is subject to the applicable supplier or manufacturer terms and the conditions under which the lamp was installed and operated.
For assistance with an order, product identification, or a suspected manufacturing defect, contact LabgearUSA customer service with the order information, product model, and a description of the issue. Retain the original packaging and follow the return instructions provided before shipping a lamp.
For a dependable replacement, order the exact lamp model specified for your equipment: SKU# OSR 69238, OSRAM XBO 150 W/4, P/N 69238, GTIN 4050300508382.
Before ordering, verify the complete model designation, mounting configuration, electrical requirements, and instrument compatibility. In particular, the XBO 150 W/4 should not be substituted for another XBO 150 W variant solely because the nominal wattage is the same.
ScienceLighting can assist with product identification and purchasing questions. If your application requires multiple lamps or an instrument-specific configuration, provide the equipment manufacturer and model number when making your inquiry.
Add to Cart to order the OSRAM XBO 150 W/4 xenon short-arc lamp through ScienceLighting.com.
This lamp is used for various instruments and microscopes such as:
Aminco / SLM 470, SLM4800, SLM8000 and SLM8100, Hitachi F1000, F1080, F1200, F2000, F3000, F3010, F4000, F4010, F4500, F4010 and F7480, Narva 682.52, Jena Pictoval, Leitz 500-008, LH250, Perkinelmer 650, LS1 Series, LS2 Series and 200 Series, Shimadzu RF10A, RF1501, RF5000, RF5301, RF535, RF5301 and RF551, Waters 470 and 474, and Zeiss 381617.
Xenon Short Arc lamps emit harmful ULTRAVIOLET RADIATION, are under HIGH PRESSURE, require a HIGH VOLTAGE ignition, and can GENERATE OZONE (unless designated "OFR".) These lamps get VERY HOT during operation, and remain hot after operation for a significant time. Avoid direct or reflected exposure as this can cause serious skin burns and eye injury. This lamp should only be operated in properly designed and maintained equipment. Proper protective gear should be worn at any time the lamps are to be handled.
Choose a currency below to display product prices in the selected currency.
US Dollar
EURO - EUROPEAN UNION
JPY -JAPAN YEN
CAD - CANADA
INR - INDIA
CNY - CHINA
MXN - MEXICO
GBP - GREAT BRITAIN
SGD - SINGAPORE
KRW - SOUTH KOREAN REPUBLIC
AUD - AUSTRALIA
SAR - SAUDI ARABIA
ZAR - SOUTH AFRICAs
CHF - SWITZERLAND
ARA - ARGENTINA
BRL - BRAZIL
CLP - CHILE
COP - COLOMBIA
DKK - DENMARK
IDR - INDONESIA
NOK - NORWAY
NZD - NEW ZEALAND
PHP - PHILIPPINES
PLN - POLAND
SEK - SWEDEN
TWD - TAIWAN
UAH - UKRAINE
THB - THAILAND
MYR - MALAYSIAN RINGGIT
AED - UNITED ARAB EMIRATES
BGN - BULGARIA
HUF - HUNGARY
CZK - CZECH REPUBLIC
ILS - ISRAEL
EGP - EGYPT
TRY - TURKEY
RON - ROMANIA
KES - KENYA
PKR - PAKISTAN
IQD - IRAQ
KWD - KUWAIT
VND - VIET NAM
JMD - JAMAICA
DOP - DOMINICAN REPUBLIC
JOD - JORDAN
PEN - PERU