USHIO’s SMARTARC™ELDC 2.31 electronic power supply with digital power management and microprocessor controls, power factor correction, and comprehensive protection mechanisms in a compact and “intelligent” solution.  Operates 100W to 200W DC short arc discharge lamps such as Emarc SMR200, HTL 38465, HXP R120 and others.  (Call to verify compatibilty.) 

Features

• Operates various EmArc® HTL and HXP R type DC short arc lamps in power ranges between 100W-200W and operating voltages between 36V-98V.

• Output selections are adjustable in 6 steps via solder bridges (call for details).

• Power factor corrected line input with built-in EMI filter.

• Wide input voltage range: 90VAC to 264VAC.

• Meets CE & FCC Part “A” standards.

• Newly designed anti-aging and arc control circuit for high optical reliability over lamp lifetime.

• Digital power management and microprocessor controlled with high output stability.

• Output is short circuit protected.

• Includes a 90ºC thermal shut-off feature.

• Photo feedback terminal connection enables customer individualized lighting system regulation.

• Auxiliary 24V/200mA output at two terminals for fan drive (available when the lamp is in operation).

• UL1950, UL508, UL2601, CSA C22.2 Certification.

Specifications

Electrical Data

All values are valid at 25° ±5°C, unless otherwise noted.

Input Data

*Presettable in 6 steps. Continuous variable from preset to 200W by optocoupler.

Lamp Output Data

Ignition

Plugs and Cables

Pin Assignment and Fuse

• Storage Temperature Range:  -20°C – +50°C

• Humidity Range: 20% – 95% non-condensing

• Altitude (Operating): 0 ft. to 10,000 ft.

• Safety and Performance Standards: CSA C22.2 No.60950 UL60950,UL508, UL2601 Certified (CB-Test and UL must be completed with the final product.)

• Dimensions (L x W x H):  180 x 71 x 32 mm

• Weight: 0.472 kg (1 lb)

 Caution

• HEAT SINK AND SAFETY: The heat sink is connected to line voltage. Do not touch or connect to PE!