The Osram XBO 1000 W/HTP OFR is a 1000 watt, Xenon High Pressure Cinema Film Projection Lamp. The . This lamp has SFa25-14 (anode) and SFc25-14 (cathode) basing on the 46mm diameter x 330mm long clear double ended bulb. This item is made by Osram, and is commonly available from no other source but Osram/Sylvania, but as alternative part numbers 69265, XBO1000W/HTP, XBO1000W/HTPOFR, XBO1000W/HTP-OFR and other variations.

Application

• Digital

• Film Projection

• Spotlights

• Searchlights

• Solar Simulation

Features

• High luminance for brighter screen illumination,

• Consistent performance with constant 6000K color temperature,

• Continuous xenon spectrum in the visible range, similar to noon sea level sunlight,

• High arc stability,

• Dimmable over a wide range, 

• Hot restart for minimal downtime,

• Long lamp life with Osram's "eXtreme Life" technology.

Specifications

• Average rated lifetime: 2000 hours, 

• Nominal wattage: 1000 W,

• Nominal voltage: 21 V,

• Nominal current: 45 A,

• Current control range:  30A to 55A,

• Luminance: 45000 cd/cm²

• Nominal luminous flux: 35000 lm

• Color temperature 6000K,

• Color rendering index Ra 98,

• Light center length (LCL) 123.0 mm.

Product Warning

Xenon Short Arc lamps emit harmful ULTRAVIOLET RADIATION, are under HIGH PRESSURE, require a HIGH VOLTAGE ignition, and can GENERATE OZONE (unless designated "OFR".) These lamps get VERY HOT during operation, and remain hot after operation for a significant time. Avoid direct or reflected exposure as this can cause serious skin burns and eye injury. This lamp should only be operated in properly designed and maintained equipment. Xenon (XBO) lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Xenon lamps are highly explosive. When hot, xenon lamps can cause burn marks. They should only be handled when the lamp is at room temperature. Always use the protective jackets supplied when handling these lamps. When packing the lamps and when installing or removing the lamps without their protective jackets, always wear protective clothing (face shield with neck protector, protective jacket and lint-free, cut-resistant gloves). For more information see the relevant in-pack leaflets and operating instructions.